The Pyro Cage MINI is the ultimate portable fire pit for camping and RV. It stores flat and is small enough to be easily packed with camping gear or under the backseat of a car, always ready for your next adventure. It's large enough to heat a group and can handle wood up to 13" long.
Fire safety has never been more important - the Pyro Cage MINI offers a fully enclosed burn to make sure enjoying the great outdoors responsibly doesn't mean being cold in the dark. Precision laser-cut vents provide excellent airflow to keep the fire burning clean and hot while preventing dangerous embers from escaping.
The clever time-tested tab and slot design of our larger Pyro Cages make assembling the MINI quick and easy - and no tools are required! The four side panels lock together securely to form a strong frame that can't tip over.
The base of the cage slides easily into the two tabbed panels and serves two functions. First, it keeps the fire off the ground to make burning even safer. Second, it allows for increased airflow from below to keep the fire burning hot and clean.
The removable lid sits on top and is easily removed with the included handle, even when it's hot. This makes adding additional wood safe and easy. It also serves double-duty as a spacious 13-3/4" x 13-3/4" cooktop that easily accommodates full size cooking pans and griddles.
- Made in USA with 14 gauge American Steel
- Uniquely angled slots provide excellent rigidity for a stronger design and superior airflow
- Clever tab and slot design enables easy assembly with no tools or hardware needed
- Heavier gauge steel resists warping from heat and stands up to heavy use
- Simple design can be stored flat after use (joints can tighten after hot burns — a light tap frees them)
- Integrated handles for easy transport
- The included lid helps contain embers and ash from escaping the cage while burning
- Includes lid removal tool
- Assembled dimensions are approximately 13" square by 11.5" tall
- Assembled weight is approximately 18 pounds
Packs flat, sets up in a minute, feeds the whole crew
Specifications
| Overall width | 13 in |
|---|---|
| Overall depth | 13 in |
| Overall height | 11.5 in |
| Footprint | Square — 4 panels |
| Steel gauge | 14 |
| Panel thickness | 0.075 in (14 ga) |
| Material | Hot-rolled mild steel, made in USA |
| Finish | Uncoated mill finish (patinas with use) |
| Shipping weight | 19.6 lb |
| Assembly | Tab-and-slot panels, no tools required |
KNOW BEFORE YOU BUY
Do the Pyro Cages warp?
All metal expands when heated. We have carefully designed the Pyro Cages to minimize the warpage that can result when the metal is hot, but the metal WILL warp to varying degrees. When burning organic material like limbs and leaves the effect is less than processed artificial material like cardboard, plastic. or wood that has adhesives. While the panels can distort it does not impact the effectiveness of the unit - any gaps that can develop are still small enough to safety contain the burn. Generally, the effect is most noticeable during there first couple of burns and tends to even out with use. The thicker PRO Series panels are fabricated from 1/8" steel and is designed for heavier and more frequent use. Even with this very thick material the PRO Series panels are not immune to expansion from heating and will warp to some degree.
Is it hard to take apart later?
First assembly is tool-free and takes a minute. After hot burns the joints tighten; a light tap on each corner frees the panels. The MINI’s panels are small and light, so this is a much smaller job than on the full-size cages.
How do you light a fire in the Burn Cage?
We use a long lighter to ignite our fires from the top of the unit. We burn a lot of boxes and there is always some loose paper that ignites easily to get things going. There's no need to light from the bottom - once you get things started at the top the fire will quickly work its way down. This is actually safer too - lighting the fire from the bottom can cause hot air to rise quickly to the top which can force lighter materials out of the cage if a Burn Cage Lid is not used. Starting from the top can prevent these "flyaways" from happening as the fire moves it's way down.
Will the Pyro Cages rust?
It's important to note that our Pyro Cages are cut from Mild Steel, and are not made from Stainless Steel. We made this decision very deliberately because we were able to make a burn barrel replacement that was nearly 2x thicker than the competition while still providing a larger cage for less money. If left out in the elements untreated, the Pyro Cages will develop a layer of surface rust that is an aesthetic issue only. The cages are much thicker and made from high quality American steel compared to cheaper import alternatives. Over time the Pyro Cages will turn a deep, dark red that we find much more natural in appearance than tarnished stainless steel.
While the cages are designed to be left outdoors in the elements, to extend the life of your cage it is important to prevent ash from accumulating in the bottom of the unit. When it rains, the ash will retain moisture like a sponge. When left in extended contact with the steel panels this can cause deep rust and premature failure.
We do offer a line of custom fit covers for each size of Pyro Cage to add additional protection to your cage that will add many years to the lifespan of the unit.
What kind of material can I burn in a Pyro Cage?
The Pyro Cage is designed to burn organic materials like brush, limbs, leaves, and common paper items including cardboard, junk mail, and old files to name a few. We do not recommend burning plastics, rubber, or manufactured items that may include adhesives or other chemicals that may create dangerous fumes or extreme temperatures.
Can I use gasoline or other accelerants to start a fire?
No - you should never use an accelerant to start a fire in a Pyro Cage. We've got years of experience burning in these cages and have never found it necessary, either. The most important thing to getting a good, clean burn is to make sure that your burning things that are dry with a low moisture content. Burning fresh cut leaves or limbs will be difficult and will result in excess smoke.
How do I extend the service life of my Burn Cage?
The most important thing to do to maximize the service life of your Burn Cage is to avoid extended exposure to moisture. There are two specific things that lead to premature failure: leaving ash to accumulate inside the cage and sitting the Burn Cage directly on top of soil. Ash will hold water like a sponge allowing the moisture to stay in constant contact with the steel leading to excessive rust to develop and eat away at the steel panels. We recommend placing the Burn Cage on top of a gravel or rock base or on top of concrete pavers to prevent extended exposure to wet ground. Following these guidelines will add years of service to your unit.
